One of the easiest ways to clean tile and grout is with a sponge mop. Simply dampen the sponge with a drop or two of dishwashing liquid, such as Liquid Nail Polish, and gently scrub the tile and grout with circular movements. Be very careful when you are cleaning tile and grout with a sponge mop.

The grout might be very dirty, but a little water will restore its shine. You can also use a little liquid detergent, such as dishwasher detergent, to clean tile floors. Apply this solution to a rag and scrub the tile surfaces using the same circular motions that you used with the dishwasher solution.

Never mix detergents in water. This can destroy the grout. Many people recommend using an old toothbrush or cotton buds with small bristles dipped in diluted mild dishwasher liquid to clean their tile floors. Using this technique also allows homeowners to take off their grout between cleaning sessions.

If you need to remove mastic, tar, and other hard materials from grout lines, try using an acidic cleaner. These acidic solutions can also work on ceramic tiles. Mix one cup of vinegar with five cups of warm water. Apply this mixture to the grout cleaning lines and scrub vigorously, being careful to only use a soft bristle brush.

Lemon juice is also an excellent grout cleaning can be done with. Simply saturate a rag with lemon juice and scrub the tile floors with it. You can also use white vinegar to get the stains out of the tile if the original color has faded over time.

As an alternative to using commercial cleaning agents, you can make your own cleaning agents. Mix one cup of hot tap water with one tablespoon of baking soda and one tablespoon of white vinegar. Other ingredients can be lemon juice, salt, or baking soda, but be sure to use a fragrance-free product.

Scrub the floors in order to get out as much of the dirt as possible. Do not forget to thoroughly dry the floor after each treatment. This will prevent water from getting into the cracks of the grout. Lemon juice and baking soda are very mild cleaning agents.

For stronger solutions, you can combine them with other ingredients to create a more effective cleaning agent. A combination such as lemon juice and 2 teaspoons of salt is a great way to get out food stains from grout. A combination of lemon juice and peroxide can be used to whiten discolored grout.

Other ingredients can also be used to brighten grout such as hydrogen peroxide or dish soap. Once you have removed as much of the food and or grease as possible from the grout lines, you should move on to scrubbing the remaining material out of the grout. This Tile Cleaning Service will be more than happy to get the job done for you so that you can focus on relaxing after a day’s work.

Start in one corner at a time and work your way across the entire room. You want to work in small sections so that the cleaning solution is easy to spread across the entire area. The scrub pad you use should be made from non-slip rubber. If you are using any kitchen scented cleaners, make sure they do not have any abrasive ingredients in them.

After you have finished cleaning the grout in a large section of the room, you should then check to see if there is any additional dirt that is still in the grout. If there is dirt remaining after you have scrubbed it with a scrub pad, you should then clean it with a cleaning agent that is designed to get rid of grout stains.

If you continue to use a dirty sponge or scrub pad after you have cleaned the grout in an attempt to remove any dirt that remains, then you will only cause the dirt to re-appear once you have finished cleaning the tile and grout.

The best way to avoid this situation is to only use a sponge or brush when you are cleaning the tile and grout in an area that you know will not be subjected to dirt or stains for a long period of time.